李振环教授

发布时间:2017-01-18文章来源:材料科学与工程学院浏览:2324

李振环,博士、教授、博士生导师。

简介

主持和完成国家自然科学基金4项,主持和完成中石化重点和重大项目5项,主持和完成天津市自然科学基金项目3项,主持完成山西省科技创新项目1项,主持完成中国纺织工业联合会基金1项。参与国家自然科学基金2项、参与军工配套项目1项等。2012年入选天津市高校中青年骨干创新人才,2013年入选天津市“131第一层次人才2014入选山西省科技创新项目首席专家,2016年入选天津市“131”创新型人才团队带头人,2017年入选天津市高校材料学科领军人才。近5年在J. Mater. Chem. AGreen ChemJ. Member. Sci.Chem. Eng. J发表论文50余篇,授权专利18项。开发了1000/规模无锂合成聚苯硫醚技术,实现了高温过滤行业用聚芳(含苯)硫醚砜纤维材料的1000/规模工业化生产,实现了2000/年规模优级碳酸二丁酯产品工业生产。开发了聚苯硫醚膜材料和聚苯硫醚熔喷超细纤维材料,开发了生物质为原料合成呋喃基聚酯技术和呋喃聚酯纤维技术,形成了中试产品。担任纺织行业纤维过滤和防护材料重点实验室重点实验室主任、中国纺织品行业协会过滤与分离用纺织品分会名誉会长、中国材料研究学会纤维材料改性与复合技术分会第一届理事会副秘书长。

联系方式:电子邮件: zhenhuanli1975@aliyun.com.cn; lizhenhuan@tjpu.edu.cn; 电话:02283955358

研究领域:(1)聚苯硫醚膜材料的制备与应用、(2)高性能聚苯硫醚和改性聚苯硫醚制备与应用、无熔滴和抗氧化聚苯硫醚材料开发、(3)聚苯硫醚熔喷超细纤维制备与应用、(4)呋喃基聚酯合成、成形和应用、(5)碳酸酯合成与应用、(6)电极材料和多相催化材料制备与应用、精细化学品催化合成。

在研主持科研项目

1聚芳硫醚PArSOX膜可控分相、多级孔构筑及选择性分离机理研究,国家自然科学基金(面上21878231)、2019-2022

2DMC法合成α-氨基酸-N-羧酸酐及其定向酰基化和靶向关环催化机制研究,国家自然科学基金(面上21676202),2017- 2020年;

3、 工程塑料用聚苯硫醚产品的研究开发,中石化(216090)、2016.01-2017.12

4、聚苯硫醚技术研究及产品开发,中石化、(218006-8)、2017.01-2020.12

5、中空纤维膜用PPS基树脂制备、膜结构调控极其应用研究,天津市自然科学基金重点项目(15JCZDJC37000)201504-2018.03

6、中空纤维膜用聚苯硫醚基树脂制备、结构调控及其膜应用研究,中国纺织工业联合会应用基础研究(J201406)、2015-2017

论文

2018

1Nitrogen and Fluorine Hybridization State Tuning in Hierarchical Honeycomb-like Carbon Nanofibers for Optimized Electrocatalytic ORR in Alkaline and Acidic Electrolytes, Journal of Power Sources, 2018 (accepted).

2Direct catalytic conversion of glucose and cellulose, Green Chemistry, 2018, 20(4): 863-872.

3Nano-V2O5/Ti porous membrane electrode with enhanced electrochemical activity for the high-efficiency oxidation of cyclohexane, Green Chemistry, 2018, 20(17): 3944-3953.

4Graphene oxide composite membranes cross-linked with urea for enhanced desalting properties, Journal of Membrane Science, 2018, 563: 718-725.

5Preparation, characterization of PPS micro-porous membranes and their excellent performance in vacuum membrane distillation, Journal of Membrane Science, 2018, 556: 107-117.

6Mussel-inspired modification of PPS membrane to separate and remove the dyes from the wastewater, Chemical Engineering Journal, 2018, 341: 371-382.

7Graphene oxide hybrid poly(p-phenylene sulfide) nanofiltration membrane intercalated by bis(triethoxysilyl) ethane, Chemical Engineering Journal, 2018, 352: 10-19.

8A metal-Nano GO frameworks/PPS membrane with super water flux and high dye interception, Journal of Membrane Science, 2018, https://doi.org/10.1016/j. memsci.2018.12.052.

9Superhydrophilic poly(p-phenylene sulfide) membrane preparation with acid/alkali solution resistance and its usage in oil/water separation, Separation And Purification Technology, 2018, 192: 262-270.

10Activation of formyl C-H and hydroxyl O-H bonds in HMF by the CuO (111) and Co3O4 (110) surfaces: A DFT study, Applied Surface Science, 2018, 456: 174-183.

11Rapid Synthesis of 3D Porous Nitrogen-Doped Carbon Nanospheres (N-CNSs) and Carbon Nanoboxes (CNBs) for Supercapacitor Electrodes, Journal of The Electrochemical Society, 2018, 165(5): A918-A923.

12The excellent catalyst support of Al2O3 fibers with needle-like mullite structure and HMF oxidation into FDCA over CuO/Al2O3 fibers, Ceramics International, 2019, 45(2): 2330-2337

13Amino acid modified PHBHHx though N-carboxyanhydride ring-opening polymerizationMaterials Letters, 2018, 231: 201-204.

14Study on the fabrication and properties of polyphenylene sulfide (PPS) membrane and its application in VMD, Desalination and Water Treatment, 2018, 129:309-318.

15A Superhydrophilic and Anti-Biofouling Polyphenylene Sulfide Microporous Membrane with Quaternary Ammonium Salts, Macromolecular Research, 2018, 26(9):800-807.

16Lithium doped TiO2 as catalysts for the transesterification of DMC with BPA,

Molecular Catalysis, 2018, in accepted.

  

2017

17The preparation of continuous CeO2/CuO/Al2O3 ultrafine fibers by electro-blowing spinning (EBS) and its photocatalytic activity, Journal of Materials Science-Materials in Electronics 2017, 28(17): 12580-12590.

18Design and fabrication of flexible mesoporous Si-doped Al2O3 ultrafine fibers by electro-blow spinning (EBS) technique, Ceramics International, 2017, 43(13): 9729-9737. 

19Performance of [Emim]Br, [Bmim]Br and 2,5-furandicarboxylic acid in fructose conversion to 5-hydroxymethyfurfural, Molecular Catalysis, 2017( 438): 197-203.

 20C-60 as fine fillers to improve poly(phenylene sulfide) electrical conductivity and mechanical property, Scientific Reports, 2017, 7, 4443.

21Rational design of N-doped carbon nanobox-supported Fe/Fe2N/Fe3C nanoparticles as efficient oxygen reduction catalysts for Zn-air batteries, Journal of Materials Chemistry A, 2017, 5(22): 11340-11347.

22SiC-fixed organophilic montmorillonite hybrids for poly(phenylene sulfide) composites with enhanced oxidation resistance, RSC Advances, 2017, 7 ( 74): 46678-46689.

23Higher UV-shielding ability and lower photocatalytic activity of TiO2@SiO2/APTES and its excellent performance in enhancing the photostability of poly(p-phenylene sulfide), RSC Advances2017, 7(35): 21758-21767.

24Preparation of a polyphenylene sulfide membrane from a ternary polymer/solvent/non-solvent system by thermally induced phase separation, RSC Advances, 2017, 7(17): 10503-10516.   

2016

25Graphene Preparation by Phenylmagnesium Bromide and Its Excellent Electrical Conductivity Performance in Graphene/Poly(p-phenylene sulfide) Composites, Industrial & Engineer Chemistry Research, 2016, 55(41): 10860-10867.

26Hydrophilic Graphene Preparation from Gallic Acid Modified Graphene Oxide in Magnesium Self-Propagating High Temperature Synthesis Process, Scientific Reports,  2016, 6: 35184.

27Excellent performance of TiO2(B) nanotubes in selective transesterification of DMC with phenol derivatives, Chemical Engineering Journal,  2016301: 12-18.

28Nb2O5-gamma-Al2O3 nanofibers as heterogeneous catalysts for efficient conversion of glucose to 5-hydroxymethylfurfural, Scientific Reports, 2016, 6: 34068.

29Effects of hydrogen bonding between MWCNT and PPS on the properties of PPS/MWCNT composites, RSC Advances, 2016, 6(95): 92378-92386.

30Selective oxidation of 5-hydroxymethylfurfural with H2O2 catalyzed by a molybdenum complex, Green Chemistry,  2016, 18(7): 2122-2128.

31Furan-based co-polyesters with enhanced thermal properties: poly(1,4-butylene-co-1,4-cyclo hexanedimethylene-2,5-furandicarboxylic acid), RSC Advances, 2016,  6(33): 27632-27639.

32Formation of larger-area graphene from small GO sheets in the presence of basic divalent sulfide species and its use in biomass conversion, RSC Advances, 2016, 6 (14): 11176-11184.

专利

1、一种合成低色泽高纯度纤维级聚苯硫醚树脂的方法、2016ZL 2011 10328395.4

2、合成高聚合度聚苯硫醚用对二氯苯的提纯方法、2015ZL 2011 10277830.5

3、一种具有自熄性和无熔滴的PPS纤维的制备方法、2017ZL201510631820.5

4、一种聚苯硫醚/石墨烯复合材料的制备方法、2018ZL201510350644.8

5、一种抗氧化聚苯硫醚树脂的制备方法、2017ZL20151035644.9

6、一种合成碳酸二丁酯的方法、2016ZL201410309109.3

7、一种制备5-羟甲基糠醛的方法、2014ZL201210377712.6

8、一种中间体二甲氧基碳酸双酚A二酯的制备方法、2014ZL201110364553.1

9、一种合成二甲氧基碳酸双酚A二酯催化剂的制备方法、2014ZL201410312867.0

10、一种5-羟甲基糠醛制备25-呋喃二甲酸的方法、2017ZL201510395096.0

11一种磺酸和硫醚协同杂化石墨烯催化剂的制备方法、2017ZL201510308998.6

12、一种石墨烯负载金属氧化物催化剂的制备方法、2018ZL201510292763.2

13、一种合成二甲氧基碳酸双酚A二酯的催化剂及其制备方法、2018ZL201610130596.6

14、一种2,5-呋喃二甲酸基聚酯纤维的制备方法、2018ZL201611049260.3

15、一种聚氨基酸改性聚苯硫醚多孔膜的制备方法、2018ZL201610666063.X

16、一种离子液体功能化聚苯硫醚多孔膜的制备方法、2018ZL201610666062.5

17、一种5-羟甲基糠醛光催化制备2,5-呋喃二甲酸的方法、2018ZL201610633631.6